A method of designing a semiconductor integrated circuit makes it possible
to reduce the amount of manual routing of a power wire. After a V.sub.DD
power wire for a circuit block and a V.sub.SS power wire for the circuit
block have been routed, the number and positions of y-direction V.sub.DD
power wires are determined from consideration of the positions thereof. A
first y-direction V.sub.DD power wire among the y-direction V.sub.DD power
wires is used without being in contact with edges of the V.sub.SS power
wire for the circuit block, but it overlays the routing position thereof.
For that reason, non-selection of that first y-direction V.sub.DD power
wire is determined. The other y-direction V.sub.DD power wires are
subsequently routed automatically.
Метод конструировать цепь полупроводника интегрированную делает его по возможности уменьшить количество ручной трассы провода силы. После того как были направлены провод силы V.sub.DD для блока цепи и провод силы V.sub.SS для блока цепи, число и положения проводов силы ы-napravleni4 V.sub.DD обусловлены от рассмотрения положений thereof. Первый провод силы ы-napravleni4 V.sub.DD среди проводов силы ы-napravleni4 V.sub.DD использован без быть in contact with края провода силы V.sub.SS для блока цепи, но он overlays положение трассы thereof. Для той причины, обусловлен non-selection того первого провода силы ы-napravleni4 V.sub.DD. Другие проводы силы ы-napravleni4 V.sub.DD затем направлены автоматически.