Electrostatic optical shutter is disclosed in which a resilient electrode in the shape of a membrane made from optically transparent and electrically insulating film is disposed over an optically transparent and electrically insulating substrate and supported by one or several flexible tether beams which are attached to the substrate through the conductive pillars. Both the membrane and the substrate contain a grating with periodically repeated parallel stripes made from electrically conductive and opaque material. The stripes are connected at one or both ends to form continuous electrodes, while the grating structures on the electrodes are shifted from each other by a half a period to block the light transmission through the shutter in the unbiased state. Under electrical bias, the membrane is moved both laterally and normally to the substrate, which results in a spatial alignment of the conductive stripes in both grating structures and formation of the openings in the shutter for the light transmission. A flat panel display having video and color capabilities and comprising two-dimensional matrix of such shutters is disclosed. To implement passive matrix driving architecture, each pixel of the display contains a thin-film diode and a thin-film resistor to eliminate cross talk between the pixels. Both the transmissive and reflective modes of the display operation are proposed. A sequential pulsed illumination with the light emitting diodes of three major colors is used to produce the color in the display. Another approach in making a flat panel display, capable of operating in both transmissive and reflective mode, is disclosed in which two-terminal electrical control of the pixels produces effect of bistability in positioning of the membrane relative to the substrate and thereby provides a memory effect, which allows one to hold the "on"-state of each pixel for almost the entire frame time and thus increase the display brightness.

L'otturatore ottico elettrostatico è rilevato in cui un elettrodo resiliente nella figura di una membrana ha fatto otticamente da trasparente e la pellicola elettricamente isolante è disposta di sopra otticamente un trasparente ed il substrato elettricamente isolante e sostenuto da un o parecchio flessibile lega i fasci che sono fissati al substrato attraverso le colonne conduttive. Sia la membrana che il substrato contengono una grata con le bande parallele periodicamente ripetute fatte elettricamente da materiale conduttivo ed opaco. Le bande sono collegate ad una o entrambe le estremità agli elettrodi continui della forma, mentre le strutture stridenti sugli elettrodi sono spostate da a vicenda da una metà un di periodo per ostruire la trasmissione della luce tramite l'otturatore nell'imparziale dichiarano. Sotto polarizzazione elettrica, la membrana è spostata lateralmente che normalmente sia verso il substrato, che provoca un allineamento spaziale delle bande conduttive in entrambe le strutture stridenti e la formazione delle aperture nell'otturatore per la trasmissione della luce. Una visualizzazione a schermo piatto che ha possibilità di colore e del video e che contiene la tabella bidimensionale tali otturatori è rilevata. Per effettuare la tabella passiva che guida l'architettura, ogni pixel dell'esposizione contiene un diodo di sottili pellicole e un resistore di sottili pellicole per eliminare il colloquio trasversale fra i pixel. Sia i modi transmissive che riflettenti del funzionamento dell'esposizione sono proposti. Un'illuminazione pulsata sequenziale con i diodi luminescenti di tre colori importanti è usata per produrre il colore nell'esposizione. Un altri metodo nel fare una visualizzazione a schermo piatto, capace di funzionamento sia nel modo transmissive che riflettente, è rilevato in cui il controllo elettrico del due-terminale dei pixel produce l'effetto del bistability nel posizionare della membrana riguardante il substrato e quindi fornisce un effetto di memoria, che permette che uno tenga "il on"-dichiarare di ogni pixel per quasi l'intero tempo della struttura ed aumenti così la luminosità dell'esposizione.

 
Web www.patentalert.com

< (none)

< Organic electroluminescence display device and producing method thereof

> Multi-color organic electroluminescence device with overlapping luminous layers

> (none)

~ 00015