An ultra-high strength metastable austenitic stainless steel exhibiting a tensile strength of not less than 2200 N/mm.sup.2 has a chemical composition comprising, in mass %, not more than 0.15 % of C, more than 1.0 to 6.0 % of Si, not more than 5.0 % of Mn, 4.0-10.0 % of Ni, 12.0-18.0 % of Cr, not more than 3.5 % of Cu, not more than 5.0 % of Mo, not more than 0.02 % of N, 0.1-0.5 % of Ti, optionally one or both of not more than 0.5 % of V and not more than 0.5 % of Nb, and the balance of Fe and unavoidable impurities, satisfies Si+Mo.gtoreq.3.5 %, has a value of Md(N) defined by the equation Md(N)=580-520C-2Si-16Mn-16Cr-23Ni-300N-26Cu-10Mo of 20-140, exhibits a cold worked multiphase texture composed of 50-95 vol % of martensite phase and the remainder substantially of austenite phase, and has Mo-system precipitates and Ti-system precipitates distributed in the martensite phase.

Ένας υπερβολικά υψηλός μετασταθείς ωστενιτικός ανοξείδωτος χάλυβας δύναμης που εκθέτει μια εκτατή δύναμη περισσότερο από 2200 ν/mm.sup.2 έχει μια χημική σύνθεση που περιλαμβάνει, στη μάζα %, όχι περισσότερο από 0,15% του γ, περισσότερο από 1,0 6,0% του Si, όχι περισσότερο από 5,0% του ΜΝ, 4.0-10.0% του Νι, 12.0-18.0% του χρωμίου, όχι περισσότερο από 3,5% του cu, όχι περισσότερο από 5,0% του MO, όχι περισσότερο από 0,02% του ν, 0.1-0.5% του Tj, προαιρετικά ένα ή και από όχι περισσότερο από 0,5% του Β και όχι περισσότερο από 0,5% του NB, και η ισορροπία του Φε και των αναπόφευκτων ακαθαρσιών, ικανοποιεί Si+Mo.gtoreq.3.5 %, καθορίζει μια αξία του MD (N) % της φάσης μαρτενσίτη και το υπόλοιπο ουσιαστικά της φάσης ωστενίτη, και διανέμουν τα ιζήματα MO-SYSTIMA'TWN και τα ιζήματα Tj-systima'twn στη φάση μαρτενσίτη.

 
Web www.patentalert.com

< (none)

< Process for forming cold formed high-load bearing steel parts

> Martensitic stainless steel products

> (none)

~ 00042