Magnetic stripes are applied to magnetically readable credit cards by incorporating the magnetic stripes in a cover sheet and laminating this cover sheet to a core stock sheet and then severing the laminated assembly into individual cards. The magnetic material bearing cover sheet is made by feeding the cover sheet without stripes continuously through a nip along with a plurality of tapes. Each tape is a laminate originally including a release layer, a magnetic layer, an adhesive layer, in that order, on a carrier layer. Heat and pressure applied to the nip releases the magnetic layer from the carrier layer and activates the adhesive layer to bond the magnetic layer of each tape to the original cover sheet, thus forming a stripe on the cover sheet. Distortion of the cover sheet by substantial shrinkage or wrinkling due to the heat effects resulting from the bonding operation are effectively eliminated by the use of a chill roller. In this regard, the nip is formed from a heated roller in juxtaposition to a reaction roller which contacts the cover sheet. The temperature of the reaction roller is controlled by surface contact with the chill roller to promote effective adhesive bonding while limiting shrinkage to the cover sheet in the order of less than 3%.

Магнитные нашивки приложены к магнитно четкие кредитнаяа карточка путем включать магнитные нашивки в обложкы и прокатывать этот обложкы к листу штока сердечника и после этого разъединять прокатанный агрегат в индивидуальные карточки. Магнитный материальный обложкы подшипника сделан путем подавать обложкы без нашивок непрерывно через щипок вместе с множественностью лент. Каждая лента будет ламинатом первоначально включая слой отпуска, магнитный слой, слипчивый слой, в том заказе, на слое несущей. Жара и давление приложили к отпускам щипка магнитный слой от слоя несущей и активируют слипчивый слой для того чтобы скрепить магнитный слой каждой ленты к первоначально обложкы, таким образом формирующ нашивку на обложкы. Искажение обложкы существенной усушкой или сморщивать должный к влияниям жары приводя к от деятельности bonding эффективно исключены пользой chill ролика. В этом отношении, щипок сформирован от нагретого ролика в юкстапозиции к ролику реакции который контактирует обложкы. Температура ролика реакции проконтролирована поверхностным контактом с chill роликом для того чтобы повысить эффективный слипчивый bonding пока ограничивающ усушку к обложкы в заказе меньш чем 3%.

 
Web www.patentalert.com

< Method and apparatus for making high refractive index (HRI) film

< Semi-transparent reflective layer for a phase hologram

> Method for making transparent reflective films

> Two-dimensional/three dimensional graphic material and method of making same

~ 00068