Label holder intended to be mounted in a hanging manner on a pin (6) which
is arranged tranversely to a bar (3) projecting from a product display
stand or equivalent. The holder (4) is provided with members (5) which
make possible articulated mounting of the holder on the pin (6) and
members for adjusting the angle the holder forms with the bar. To this
end, the holder (4) is provided with an adjustment member on its rear
side, which comprises a displaceable engagement element (9, 10) which is
adapted so as to be capable of being displaced upward in the direction of
the bar (3). The engagement element (9, 10) can then enter into engagement
with the bar (3) when the holder (4) forms different angles with the
latter and constitutes a support for the holder (4) which retains the
latter in an angular position occupied relative to the bar (3).
Обозначьте держатель предназначено быть установленным в вися образе на штыре (6) аранжирован tranversely к штанге (3) проектируя от стойки или эквивалента показа продуктов. Держатель (4) обеспечен с членами (5) делают по возможности артикулированную установку держателя на штыре (6) и членах для регулировать угол формы держателя с адвокатскя сословие. К этому концу, держатель (4) обеспечен с членом регулировки на своей задней стороне, которая состоит из displaceable элемента захвата (9, 10) который приспособлен для того чтобы быть способен быть смещенным вверх в направлении адвокатскя сословие (3). Элемент захвата (9, 10) может после этого включиться в захват с адвокатскя сословие (3) когда углы форм держателя (4) по-разному с последним и образовывает поддержку на держатель (4) который сохраняет последнее в угловом положении занятом по отношению к адвокатскя сословие (3).