A Class D amplifier includes a tracking circuit and a regulation circuit to provide efficient, accurate protection against excessive current flow in the power FET's of the amplifier output stage. The FET currents flowing in the output stage are mirrored across tracking resistors by the tracking circuit. The resultant voltage drops are compared to reference voltages to detect over-current situations. By mirroring scaled-down versions of the output currents, power consumption in the tracking circuit is minimized. When an over-current situation is detected, the regulation circuit modulates the duty cycle of the signal input to the output stage until the FET currents fall to acceptable levels. If two over-current indications occur during a single clocking cycle of the pulse-width modulator of the amplifier, the regulation circuit shuts off the amplifier to protect against short-circuit damage.

Um amplificador da classe D inclui um circuito seguindo e um circuito regulamentar para fornecer a proteção eficiente, exata de encontro ao fluxo da corrente excessiva nos FET's do poder do estágio da saída do amplificador. As correntes do FET que fluem no estágio da saída são espelhadas através de seguir os resistores pelo circuito seguindo. As quedas de tensão resultantes são comparadas às tensões da referência para detectar situações da sobrecarga. Espelhando versões scaled-down das correntes de saída, o consumo de potência no circuito seguindo é minimizado. Quando uma situação da sobrecarga é detectada, o circuito regulamentar modula o ciclo de dever da entrada de sinal ao estágio da saída até que as correntes do FET caiam aos níveis aceitáveis. Se duas indicações da sobrecarga ocorrerem durante um único ciclo cronometrando do modulador do pulse-width do amplificador, o circuito regulamentar fecha fora o amplificador para proteger de encontro aos danos do short-circuit.

 
Web www.patentalert.com

< Electronic siren

< Monolithic class D amplifier

> Multiple channel class D audio amplifier

> Class D amplifier with reduced clock requirement and related methods

~ 00096