Protective coating on steel parts

   
   

This invention relates to the coating of steel parts with organic polymeric materials for resistance to corrosion, abrasion, impact, salt solutions of high and low pH (both in liquid as well as vapor state) and corrosive atmospheric gases under the environment of high relative humidity and ambient conditions of temperature and pressure. To obtain secure and permanent adhesion of the coating on the steel article a polymeric coating is formulated so as to achieve chemical grafting to the steel face. This involves the use of monomers, prepolymers, catalyst and a graft initiator system. The monomers are preferably polyfunctional and when applied onto a metallic substrate, react via graft polymerization with the metal to form a polymerized layer coated onto the surface of the steel substrate. The monomers and prepolymers are so selected that when polymerized onto steel the coating has substantially zero moisture vapor-gas transmission rate and consequently acts as a barrier to moisture, oxygen and other gases from coming in contact with the surface of the steel substrate thereby improving the protective potential of the coating. Fillers may be included in the coating material to enhance physical or wear characteristics. Other components that can be added are slip agents, wetting agents, thixotropic promoters and adhesion promoters. This coating process is particularly advantageous for use with steel parts used in the manufacture of cranes

Αυτή η εφεύρεση αφορά το επίστρωμα των μερών χάλυβα με τα οργανικά πολυμερή υλικά για την αντίσταση στη διάβρωση, γδάρσιμο, αντίκτυπος, αλατισμένες λύσεις του υψηλού και χαμηλού pH (και στο υγρό καθώς επίσης και το κράτος ατμού) και των διαβρωτικών ατμοσφαιρικών αερίων στο πλαίσιο του περιβάλλοντος της υψηλής σχετικής υγρασίας και των περιβαλλοντικών συνθηκών της θερμοκρασίας και της πίεσης. Για να λάβει την ασφαλή και μόνιμη προσκόλληση του επιστρώματος στο άρθρο χάλυβα ένα πολυμερές επίστρωμα διατυπώνεται ώστε να επιτευχθεί η χημική ουσία μπολιάζοντας στο πρόσωπο χάλυβα. Αυτό περιλαμβάνει τη χρήση των μονομερών, prepolymers, του καταλύτη και ενός συστήματος ιδρυτών εμβολίου. Τα μονομερή είναι κατά προτίμηση polyfunctional και όταν εφαρμόζονται επάνω σε ένα μεταλλικό υπόστρωμα, αντιδρούν μέσω του πολυμερισμού εμβολίου με το μέταλλο για να διαμορφώσουν ένα πολυμερισμένο στρώμα που ντύνεται επάνω στην επιφάνεια του υποστρώματος χάλυβα. Τα μονομερή και prepolymers έτσι επιλέγονται ότι όταν πολυμερίζεται επάνω στο χάλυβα το επίστρωμα έχει ουσιαστικά μηδέν ποσοστό μετάδοσης υγρασίας ατμός-αέριο και ενεργεί συνεπώς ως εμπόδιο στην υγρασία, το οξυγόνο και άλλα αέρια από τον ερχομό σε επαφή με την επιφάνεια του υποστρώματος χάλυβα με αυτόν τον τρόπο που βελτιώνει την προστατευτική δυνατότητα του επιστρώματος. Τα υλικά πληρώσεως μπορούν να περιληφθούν στο υλικό επιστρώματος για να ενισχύσουν φυσικό ή να φορέσουν τα χαρακτηριστικά. Αλλα συστατικά που μπορούν να προστεθούν είναι πράκτορες ολίσθησης, βρέχοντας πράκτορες, thixotropic υποστηρικτές και υποστηρικτές προσκόλλησης. Αυτή η διαδικασία επιστρώματος είναι ιδιαίτερα συμφέρουσα για τη χρήση με τα μέρη χάλυβα που χρησιμοποιούνται στην κατασκευή των γερανών

 
Web www.patentalert.com

< Model-based system for determining process parameters for the ladle refinement of steel

< Combined installation for the treatment of steel work gases

> Method of joining steel products, method of processing junction surfaces of steel products, and reinforcing member

> Method for estimating and controlling flow pattern of molten steel in continuous casting and apparatus therefor

~ 00110