Additive compositions

   
   

Additive compositions comprising: (i) at least one oil-soluble hydrogenated block diene polymer, comprising at least one crystallizable block, obtainable by end-to-end polymerization of a linear diene, and at least one non-crystallizable block, the non-crystallizable block being obtainable by 1,2-configuration polymerization of a linear diene, by polymerization of a branched diene, or by a mixture of such polymerizations, (ii) at least one ethylene-unsaturated ester compound; and (iii) at least one comb polymer. The additive compositions are used to improve cold flow characteristics in fuel oils. The additive compositions are particularly effective in fuel oils having a 90-20% boiling temperature range, as measured in accordance with ASTM D-86, of more than 115.degree. C., preferably more than 120.degree. C., more preferably more than 130.degree. C., and most preferably more than 140.degree. C., and a final boiling point of more than 370.degree. C., preferably more than 380.degree. C., and most preferably more than 390.degree. C.

Additives Aufbauenthalten: (i) mindestens ein öllösliches hydriertes Blockdienpolymer-Plastik, mindestens einen crystallizable Block enthalten, erreichbar durch aufeinanderfolgende Polymerisierung eines linearen Diens und mindestens einen nicht-non-crystallizable Block, der nicht-non-crystallizable Block, der durch Polymerisierung 1,2-configuration eines linearen Diens, durch Polymerisierung eines ausgebrittenen Diens oder durch eine Mischung solcher Polymerisierungen, (ii) mindestens ein Äthylen-ungesättigtes Estermittel erreichbar ist; und (iii) mindestens ein Kammpolymer-Plastik. Der additive Aufbau wird benutzt, um Kaltflußeigenschaften in den Heizölen zu verbessern. Der additive Aufbau ist in den Heizölen besonders wirkungsvoll, die eine kochende 90-20% Temperaturspanne haben, wie in Übereinstimmung mit ASTM D-86, von mehr als 115.degree gemessen. C., vorzugsweise mehr als 120.degree. C., vorzugsweise mehr als 130.degree. C. und am liebsten mehr als 140.degree. C. und ein abschließender Siedepunkt von mehr als 370.degree. C., vorzugsweise mehr als 380.degree. C. und am liebsten mehr als 390.degree. C.

 
Web www.patentalert.com

< Soluble magnesium dihalide complex, preparation and use

< Moisture-induced poly(ethylene oxide) gel, method of making same and articles using same

> Ceramic-molding binder

> Ethylene copolymer composition

~ 00131