Determining via placement in the printed circuit board of a wireless test fixture

   
   

A method for determining via placement for wireless test fixture printed circuit boards (PCBs) utilizes the fixed test interface pattern of the bottom conductive pads to quickly locate the nearest bottom pad to a given top pad. The distance between the top pad and its nearest bottom pad is then calculable based on the coordinates of the respective pads on the PCB. If the distance is greater than a predetermined clearance requirement, a via is placed within the interior of the nearest bottom pad; otherwise, the via is placed exterior to the nearest bottom pad.

Un método para determinarse vía la colocación para los tableros de circuito impresos del accesorio sin hilos de la prueba (PCBs) utiliza el patrón fijo del interfaz de la prueba de los cojines conductores inferiores para localizar rápidamente el cojín inferior más cercano a un cojín superior dado. La distancia entre el cojín superior y su cojín inferior más cercano es entonces calculable basada en los coordenadas de los cojines respectivos en el PWB. Si la distancia es mayor que un requisito predeterminado de la separación, a vía se coloca dentro del interior del cojín inferior más cercano; si no, vía es el exterior puesto al cojín inferior más cercano.

 
Web www.patentalert.com

< Method and system for detecting and discriminating multipath signals

< Determining support locations in a wireless fixture of a printed circuit assembly tester

> Method and apparatus for switching an on going communication of user information between a wireless connection and a wired connection

> Wireless communications system having variable gain mixer

~ 00153