Dry paint transfer process and product

   
   

An automotive quality paint coat (44) is laminated to the exterior surface of a molded plastic car body member or panel (118). In one embodiment, the paint coat (44) includes an exterior clear coat (45) above a color coat (46). During processing, the clear coat (45) and color coat (46) are each coated on a temporary flexible casting sheet (42) and dried. A high gloss surface is transferred to the clear coat (45) from the casting sheet (42). The paint coat (44) is then transferred from the casting sheet (42) to a thin, semi-flexible thermoformable plastic backing sheet (72) by dry paint transfer-laminating techniques. The resulting laminate (70) is thermoformed into a complex three-dimensional shape of the car body member or panel. The preformed laminate (116) is then bonded to an underlying plastic substrate material, by injection-cladding techniques, for example, to form the finished article. The paint coat (44) has sufficient elongation to retain exterior automotive appearance and durability properties during thermoforming without deglossing. The backing sheet (72) absorbs defects in the substrate material so the paint coat retains its appearance and durability properties during the injection-cladding step. The finished article comprises a high gloss, defect-free paint coat on the exterior of a molded plastic car body member or panel. Solution-form polyvinylidene fluoride/acrylic paint systems have remarkably high combined gloss and distinctiveness-of-image levels, together with durability properties required for exterior automotive use.

Автомобильное пальто краски качества (44) прокатано к exterior поверхности отлитых в форму пластичных члена тела автомобиля или панели (118). В одно воплощение, пальто краски (44) вклюает exterior ясное пальто (45) над пальто цвета (46). Во время обрабатывать, ясное пальто (45) и пальто цвета (46) высушенное каждое покрынное на временно гибком листе отливки (42) и. Высокая поверхность лоска перенесена к ясному пальто (45) от листа отливки (42). Пальто краски (44) после этого перенесено от листа отливки (42) к тонкому, семи-gibkomu thermoformable пластичному листу затыловки (72) методами сухой краски переносить-prokatyva4. Приводя к ламинат (70) thermoformed в сложную трехмерную форму члена или панели тела автомобиля. Таблетированный ламинат (116) после этого скреплен к основному пластичному материалу субстрата, методами впрыск-plakirovani4, например, для того чтобы сформировать законченную статью. Пальто краски (44) имеет достаточно удлиненность для того чтобы сохранить exterior автомобильные свойства возникновения и стойкости во время thermoforming без deglossing. Лист затыловки (72) поглощает дефекты в материале субстрата поэтому пальто краски сохраняет свое возникновение и свойства стойкости во время впрыск-plakirovani4 шагают. Законченная статья состоит из высокого лоска, defect-free пальто краски на экстерьере отлитого в форму пластичного члена тела автомобиля или панели. системы краски polyvinylidene fluoride/acrylic Разрешени-formy замечательн высоко совместили уровни лоска и своеобразност-$$$-IZOBRAJENI4, together with свойства стойкости необходимы для exterior автомобильной пользы.

 
Web www.patentalert.com

< Golf balls comprising light stable materials and methods of making the same

< Laser marking using a digital micro-mirror device

> Ink-jet recording paper

> Method for processing silver halide color photographic material

~ 00154