A mold assembly for blow molding plastic articles is provided having an
upper mold member, a lower mold member and a lower support member. The
lower mold member is preferably a relatively lightweight plate having a
generally centrally located molding cavity matingly matched with an upper
molding cavity in the upper mold member. The lower mold member is moved
horizontally and optionally vertically beneath an extrusion head as a
molten parison is extruded. The lower mold member is then transported to,
and positioned within, the lower support member. The upper mold member is
then closed over the lower mold member and lower support to close the mold
assembly. The molten parison is then expanded in the mold cavity. After
the molding operation, the plastic part may be removed and the lower mold
member may be cooled by immersion in a cooling fluid. The apparatus to
move the lower mold member during extrusion of the parison and to the
molding station may be a robotic arm. The lower mold member is relatively
lightweight so that it may be efficiently moved by the robot arm while the
necessary structural support is provided by the lower support member.
Un complessivo della muffa per gli articoli di plastica dello stampaggio mediante soffiatura è fornito avendo un membro superiore della muffa, un membro più basso della muffa e un membro più basso di sostegno. Il membro più basso della muffa è preferibilmente una piastra relativamente leggera che ha una cavità di modellatura generalmente centralmente individuata matingly abbinata con una cavità superiore del modanatura nel membro superiore della muffa. Il membro più basso della muffa è spostato orizzontalmente e facoltativamente verticalmente sotto una testa dell'espulsione mentre un parison fuso si sporge. Il membro più basso della muffa allora è trasportato a ed è posizionato dentro, il membro più basso di sostegno. Il membro superiore della muffa è allora chiuso sopra il membro più basso della muffa ed il supporto più basso chiudere il complessivo della muffa. Il parison fuso allora è espanso nella cavità della muffa. Dopo il funzionamento del modanatura, la parte di plastica può essere rimossa ed il membro più basso della muffa può essere raffreddato tramite l'immersione in un liquido di raffreddamento. L'apparecchio per spostare il membro più basso della muffa durante l'espulsione del parison ed alla stazione del modanatura può essere un braccio robot. Il membro più basso della muffa è relativamente leggero in moda da poterlo spostarsi efficientemente esso dal braccio del robot mentre il supporto strutturale necessario è fornito dal membro più basso di sostegno.