Cleating features to improve adhesive interface between a bobbin and a coil of an actuator coil portion of a hard disk drive

   
   

A disk drive includes a disk, and a head stack assembly for reading and writing to the disk. The head stack assembly may include a body portion defining a through bore that defines a pivot axis; an actuator arm cantilevered from the body portion; a head gimbal assembly coupled to the actuator arm; a coil portion cantilevered from the body portion in an opposite direction from the actuator arm and a bobbin. The coil portion may define first and second actuator fork members and may include a wound coil supported by the first and second actuator fork members. The bobbin may be configured to stiffen the coil, and may include a first surface that faces the coil and that defines the thickness of the bobbin. The first surface defines one or more cleating features configured to increase the surface area of the first surface. The largest dimension of each of the cleating features in a direction that is parallel to the pivot axis may be selected to be less than the thickness of the bobbin. An adhesive may be disposed between the first surface of the bobbin and the coil.

Привод диска вклюает диск, и агрегат головного стога для чтения и сочинительство к диску. Агрегат головного стога может включить часть определяя а тела до bore определяет ось оси; рукоятка привода контрольная от части тела; головной агрегат карданного подвеса соединенный к рукоятке привода; часть катушки контрольная от части тела в противоположном направлении от рукоятки привода и катушкы. Часть катушки может определить сперва и вторые члены вилки привода и может включить катушку раны поддержанную первыми и вторыми членами вилки привода. Катушка может быть установлена для того чтобы закоченеть катушку, и может включить первую поверхность которая смотрят на катушку и которая определяет толщину катушкы. Первая поверхность определяет one or more cleating характеристики установленные для того чтобы увеличить поверхностную зону первой поверхности. Самый большой размер каждой из cleating характеристик в направлении параллельно к оси оси может быть выбрано быть чем толщина катушкы. Прилипатель может быть размещан между первой поверхностью катушкы и катушкой.

 
Web www.patentalert.com

< Disc drives having flexible circuits with liquid crystal polymer dielectric

< Vibration-damped push-pin assembly for disk drive servo writing

> Spin valve magnetic properties with oxygen-rich NiO underlayer

> Magnetic sensing element with ESD resistance improved by adjusting the lengths of antiferromagnetic layers and free layer in the height direction

~ 00167