Stack of clear laminated removable lenses for reducing surface drag on airfioils

   
   

A stack of laminated transparent lenses consists of two alternating optically clear materials in intimate contact. The materials are a plastic lens and clear adhesive. The adhesive is uninterrupted. The lens and the adhesive have refraction mismatch of less than 0.2. A tab portion is part of each lens acts as an aid in peeling way the outermost lens after contamination of the lens layer during racing conditions. The lens stack can be mounted to the posts on the face shield or laminated directly to a windshield. The lens stack can be applied to an airfoil. During a race, as mud and dirt are accumulated, the top lens of the lens stack on the airfoil can quickly be removed revealing the next (clean) lens in the stack.

Ein Stapel lamellierte transparente Objektive besteht aus zwei freie Materialien im Vertrautkontakt optisch wechselnd. Die Materialien sind ein Plastikobjektiv und ein freier Kleber. Der Kleber ist ununterbrochen. Das Objektiv und der Kleber haben Brechungfehlanpassung von weniger als 0.2. Ein Vorsprungteil ist ein Teil Taten jedes Objektivs als Hilfsmittel in abziehenweise, die das äußerste Objektiv nach Verschmutzung der Objektivschicht während des Laufens bedingt. Der Objektivstapel kann zu den Pfosten am Gesicht Schild angebracht werden oder direkt zu einer Windschutzscheibe lamelliert werden. Der Objektivstapel kann auf eine Tragfläche zugetroffen werden. Während eines Rennens als Schlamm und Schmutz werden angesammelt, das obere Objektiv des Objektivstapels auf der Tragfläche kann schnell entfernt werden, das folgende (saubere) Objektiv im Stapel aufdeckend.

 
Web www.patentalert.com

< Position sensing with improved linearity

< Rear projection screens and methods of making the same

> Optical element

> Back-side wafer singulation method

~ 00169