Switching power supply device

   
   

A switching power supply such that the step-up ratio of when the power-factor is improved does not increase, and the conversion efficiency can be improved. In a case where the error voltage Ver outputted from a conductance amplifier (23) increases over a reference voltage Vref2, a switching signal of high level is outputted from a comparator (59) to a FET (57) to turn on the FET (57). Therefore a resistor (56) is bypassed, and as a result a reference voltage Vref1 inputted into the conductance amplifier (23) is changed from a reference voltage Vref1-1 to Vref1-2 of lower level. Further, since the variation of the error voltage Ver outputted from the conductance amplifier (23) decreases, the output voltage Vout also decreases.

Ein Schaltung Spg.Versorgungsteil so, daß das Aufwärtsverhältnis von, wenn der Energie-Faktor verbessert wird, sich nicht erhöht und die Umwandlung Leistungsfähigkeit können verbessert werden. In einem Fall, in dem die Störung Spannung Ver von den Zunahmen eines Leitfähigkeitverstärkers (23) über einer Bezugsspannung Vref2 outputted, ist ein Schaltung Signal des hohen Niveaus outputted von einem Komparator (59) zu einem FET (57), um den FET (57) einzuschalten. Folglich wird ein Widerstand (56) überbrückt, und infolgedessen wird eine Bezugsspannung Vref1, die in den Leitfähigkeitverstärker (23) eingegeben wird, von einer Bezugsspannung Vref1-1 zu Vref1-2 des untereren Niveaus geändert. Weiter da die Veränderung der Störung Spannung Ver von den Abnahmen des Leitfähigkeitverstärkers (23) outputted, verringert sich die Ausgang Spannung Vout auch.

 
Web www.patentalert.com

< Variable impedance network for an integrated circuit potentiometer

< Programmable data element queuing, handling, processing and linking device integrated into an object identification and attribute acquisition system

> Vehicle accessory microphone

> Wire winding machine with remote pedestal control station and remote programming capability

~ 00175