Nickel-base superalloy composition and its use in single-crystal articles

   
   

A composition of matter is about 1 to about 3 percent rhenium, from about 6 to about 9 percent aluminum, from 0 to about 0.5 percent titanium, from about 4 to about 6 percent tantalum, from about 12.5 to about 15 percent chromium, from about 3 to about 10 percent cobalt, from about 2 to about 5 percent tungsten, from 0 to about 0.2 percent hafnium, from 0 to about 1 percent silicon, from 0 to about 0.25 percent molybdenum, from 0 to about 0.25 percent niobium, balance nickel and minor elements. The composition is preferably made into a substantially single crystal article, such as a component of a gas turbine engine.

 
Web www.patentalert.com

< Method for brazing components using a Ni-Au-P ternary brazing alloy, the assembly so produced and the ternary alloy

< Production method of aluminum alloy for sliding bearing

> Ferritic stainless steel alloy and its use as a substrate for catalytic converters

> Fouling reduction device for a tubular heat exchanger

~ 00187