Magnetic head with a vertically laminated back gap structure having magnetic layer thicknesses less than the skin depth

   
   

A magnetic write head having a vertically laminated back gap structure and method of making the same are disclosed. The magnetic head is formed with lower and upper pole pieces and a back gap structure which connects the lower and the upper pole pieces in a back gap region. In one illustrative example, the back gap is a vertically laminated structure having alternating layers of magnetic and non-magnetic materials. Each alternating layer is perpendicular to both the lower and the upper pole pieces. This vertically laminated structure significantly reduces the eddy currents in the back gap region at high operating frequencies as the layers are oriented in a direction parallel with the magnetic flux.

 
Web www.patentalert.com

< Low-overhead storage magazine

< Method and system for reducing thermal pole tip protrusion

> Disk cartridge, disk device and shutter opening/closing mechanism including a rotating body

> Tape head assembly with air bearing guide

~ 00188