A disk drive includes a head gimbal assembly that includes structure that decreases the pitch angle of the load beam, which decreases disk flutter induced track mis-registration. According to one embodiment, the disk drive includes a body portion including a bore defining a pivot axis; an actuator arm cantilevered from the body portion and a head gimbal assembly (HGA) supported at the actuator arm. The HGA includes a load beam having a first end and a second end, the first end being attached to the actuator arm, the load beam defining a load beam feature near the second end, at least a portion of the load beam feature defining an extension that is parallel to the pivot axis and that has a rectangular cross-section having a length to width aspect ratio that is greater than 1. A slider is coupled to a free end of the load beam extension, and a gimbal coupled to the second end of the load beam and to the slider.

 
Web www.patentalert.com

< Air-bearing sliders having leading read/write head and flying with negative pitch

< Head suspension configured for improved thermal performance during solder ball bonding to head slider

> Tracking and focus servo system with error signal inverse non-linearity calibration

> Resource reservation system in a computer network to support end-to-end quality-of-service constraints

~ 00220