A shaft extractor for removing a golf club head from a golf club shaft without causing side-loading to occur comprising: a central body piece having two split screw portions threaded in opposite directions, at opposite sides of a split central hex nut section. The threaded screw portions receive a pair of end split hex nuts, each threaded to fit on one of the oppositely-threaded screw sections of the central body, such that when the central nut is rotated with the end nuts held against rotation, the end nuts move outward or inward together. The split in the central body piece of the shaft extractor forms a central cavity for receiving the golf club shaft. An extractor wrench is used to hold the end nuts against rotation.

 
Web www.patentalert.com

< Compliant chain guide with blade spring

< Avoid drawing air into VCT chamber by exhausting oil into an oil ring

> Control valves with integrated check valves

> Lock pin with centrifugally operated release valve

~ 00241