A high-temperature protection layer contains (% by weight) 23 to 27% Cr, 4 to 7% Al, 0.1 to 3% Si, 0.1 to 3% Ta, 0.2 to 2% Y, 0.001 to 0.01% B, 0.001 to 0.01% Mg and 0.001 to 0.01% Ca, remainder Ni and inevitable impurities. Optionally, the Al content is in a range from over 5 up to 6% by weight.

 
Web www.patentalert.com

< Soft magnetic film and thin film magnetic head using the same

< Bulk amorphous steels based on Fe alloys

> Copper/zinc alloys having low levels of lead and good machinability

> Steel sheet for magnetic shields and manufacturing method thereof

~ 00266