A full complement taper roller bearing consists of an inner ring or cone having an inner track on its radially outer conical surface, and an outer ring or cup having an outer track on its radially inward conical surface and one or more rows of taper rollers having a contact angle of less than 30 degrees freely disposed between the inner and outer rings and guided between the tracks. Each row of rollers is axially located within a recess on the inner track defined by a shoulder abutment disposed at least at the edge of the inner track having the greatest diameter and each of the rollers is in contact with the inner track over the entire length of the taper roller in the axial direction of the bearing.