A FinFET, which by its nature has both elevated source/drains and an elevated channel that are portions of an elevated semiconductor portion that has parallel fins and one source/drain on one side of the fins and another source/drain on the other side of the fins, has all of the source/drain contacts away from the fins as much as reasonably possible. The gate contacts extend upward from the top surface of the elevated semiconductor portion. The gate also extends upward from the top surface of the elevated semiconductor portion. The contacts are located between the fins where the gate is below the height of the elevated semiconductor portion so the contacts are as far as reasonably possible from the gate, thereby reducing gate to drain capacitance and providing additional assistance to alignment tolerance.

 
Web www.patentalert.com

< Transistor device containing carbon doped silicon in a recess next to MDD to create strain in channel

> Small scale wires with microelectromechanical devices

~ 00416