In an apparatus for over-voltage and over-current protection for a step-up current-mode converter including an inductor connected via a phase node to a switch that is switched by a control signal to convert an input voltage to an output voltage, a controller has a multiplexed pin, and a resistor and a capacitor are connected in parallel between the multiplexed pin and the phase node. In an over-voltage protection mode, the controller senses the voltage on the multiplexed pin, and in an over-current protection mode, the controller supplies a current to flow through the resistor and senses the voltage on the multiplexed pin.

 
Web www.patentalert.com

< Power factor controller that computes currents without measuring them

> Non-linearity compensation circuit and bandgap reference circuit using the same

~ 00454