A method to create a low resistivity P+in-situ doped polysilicon film at
low temperature from SiH.sub.4 and BCl.sub.3 with no anneal required. At
conventional dopant concentrations using these source gases, as
deposition temperature decreases below about 550 degrees C., deposition
rate decreases and sheet resistance increases, making production of a
high-quality film impossible. By flowing very high amounts of BCl.sub.3,
however, such that the concentration of boron atoms in the resultant film
is about 7.times.10.sup.20 or higher, the deposition rate and sheet
resistance are improved, and a high-quality film is produced.