A dressing and method for treating high-tension wounds. First and second layers of a 1-butyl cyanoacrylate 16 adhesive are applied to a short, high-tension wound, with the first and second layers covering the wound and extending to at least about 2.5 mm (0.0984 in.) from each side of the wound. The first layer is allowed to set and polymerize before the second layer of 1-butyl cyanoacrylate is applied. The second layer extends at least about 2.5 mm (0.0984 in.) beyond each edge of the first layer. In the case of a long, high-tension wound, a third layer is applied after the first and second layers are allowed to set and polymerize. The third layer is at least about 2.5 mm (0.0984 in.) wide and is substantially perpendicular to the first and second layers. The third layer may occur intermittently every 2.5 cm (0.984 in.) over the length of the wound, and preferably extends at least about 5 mm (0.197 in.) beyond the edge of the first layer.