Outdoor high velocity wall and pedestal mounted fans, devices, apparatus, systems and methods of operation. The fans can have water resistant motor housings with at most one rear wall located opening for allowing a power cord to pass therethrough. The switches and pull chains are connected to the fan only through the bottom of the motor housing. The bottom of the motor housing can have a drainage hole for allowing excess moisture to drain therefrom. The motor housing can be stainless steel. Additionally, the motor housing can have a powder coat finish on all parts to reduce corrosion. The motor can be an oversized inverted outdoor rated oscillating motor having improved gear mechanisms for big torques and reduces heat rise during fan operation. The fan can operate under hot and cold temperature extremes as well as during wet and dry environmental conditions.