A CAM (current arrow map) 71 and another CAM 72 are obtained from magnetocardiogram waveforms measured from both front and back sides of a subject using data at a point of time of an R-wave peak, then the coordinates of the CAM 72 are inverted in both x and y axis directions to obtain a CAM 73. The coordinates of each of the CAMs 71 and 73 are converted to polar coordinates to obtain CAMs 74 and 75 at both front and back sides of the subject. After that, the CAM 74 is adjusted to the CAM 76 in scale to obtain a CAM 76 , and CAMs 74 and 76 are combined. Then, the CAM data at measuring points on each measuring-points-missing radius vector is inserted through an arithmetic processing by interpolation so that CAM data at every measuring point on a planispheric chart 77 are connected to each another consecutively.