The system of producing an RFID antenna using the silicon in an integrated circuit as the resonant antenna material for the purpose of reducing the cost of an RFID system and for the purpose of increasing the range and selectivity of the RFID system. According to this invention the base silicon sheets which make up the primary building material of the silicon chip (integrated circuit) is subjected to a laser ablation process. This creates three dimensional nano structures on the surface of the silicon thereby raising its absorption rate of electro magnetic signals. On the reverse side of the same silicon sheet a directional antenna is etched using standard photographic reduction techniques and standard semi conductor industry manufacturing methods. The two sides of the silicon are connected through doping aluminum or copper impurities into these same base silicon sheets causing conductivity within the sheet of silicon.