A generally cylindrical shaft has upper and lower ends and a handle at the upper end. A putter head has a forward face plate and a rear, a sole plate below and a weight plate above, a toe and a heel. The weight plate and the sole plate each have an upper and lower surface. The lower end of the shaft is coupled to the upper surface of the weight plate adjacent to the heel. An alignment assembly includes an upper line on the upper surface of the weight plate and a lower line on the upper surface of the sole plate parallel with and spaced from the toe and the heel. The upper line is located above and parallel with the lower line. The lower line extends rearwardly a greater distance than the upper line.