A method for handling a faulty device in a vehicle communication network is provided, which is used to identify devices that are either faulty, were removed from the vehicle communication network or were switched off, and to automatically initiate a fault-remedying measure. An expanded, device-specific driver having diagnostic functions is loaded by another device of the network to send a test signal to the faulty device. Either the faulty device is restarted or the faulty device is switched off depending on the reaction to the test signal. If a device is removed from the network, this is indicated in a database. A bus manager will inform other devices connected to the network that this device was removed from the network. Due to a classification of the individual devices connected to the network, not every device is able to perform the fault handling, but rather only suitably classified devices. Misuse is thereby prevented.

 
Web www.patentalert.com

< Systems and methods for monitoring and diagnosing the power generated by renewable power systems

< Utilizing a null jitter buffer to monitor session traffic

> Diagnostic mode switching

> Heat-dissipating structure of disc drive

~ 00618