A magnetic head suspension assembly is fabricated with an integral piece which includes a load beam section, a flexure section, a rear mount section and a leaf spring section between the load beam and rear mount. A tongue extends from the load beam to the flexure and has a down-facing load dimple which contacts the non-air bearing surface of an attached air bearing slider. The flexure includes narrow thin legs adjacent to a cutout that delineates the load beam tongue. The head suspension is characterized by a high first bending mode frequency and low pitch and roll stiffness.

 
Web www.patentalert.com

< Method and system for accessing non-volatile storage devices

< Method for adapting a memory system to operate with a legacy host originally designed to operate with a different memory system

> Post-facto correction for cross coupling in a flash memory

> Applying adaptive body bias to non-volatile storage based on number of programming cycles

~ 00621