Raman amplified optical system with reduction of four-wave mixing effects

   
   

A transmission fiber for use in a Raman amplified optical communication system is formed to exhibit certain characteristics that limit modulation instability and four-wave mixing in the amplification region, thus reducing the noise component present in the transmission system. In particular, the group-velocity dispersion (denoted as D and measured in terms of ps/nm-km) is restricted to be either non-positive or greater than +1.5 ps/nm-km in the pump wavelength range of interest (a typical pump wavelength range being 1430-1465 nm). Preferably, the magnitude of the dispersion is kept below a value of 10 ps/nm-km in the signal wavelength range of interest (e.g., the "C" band or "L" band). Four-wave mixing is reduced by ensuring that the zero-dispersion frequency of the transmission fiber is not centered between the pump frequency and a frequency experiencing Raman gain.

Una fibra de la transmisión para el uso en un sistema de comunicación óptica amplificado Raman se forma para exhibir ciertas características que limiten inestabilidad de la modulación y cuatro-agiten mezclarse en la región de la amplificación, así reduciendo el componente del ruido presente en el sistema de la transmisión. En detalle, la dispersión de la grupo-velocidad (denotada como D y medida en términos de ps/nm-km) se restringe para ser no positiva o mayor que +1.5 ps/nm-km en la gama de longitud de onda de la bomba del interés (una gama de longitud de onda típica de la bomba que es nm 1430-1465). Preferiblemente, la magnitud de la dispersión se guarda debajo de un valor de 10 ps/nm-km en la gama de longitud de onda de la señal del interés (e.g., la venda o el "L" venda de "C"). Cuatro-agite mezclarse es reducido asegurándose de que la frecuencia de la cero-dispersio'n de la fibra de la transmisión no está centrada entre la frecuencia de la bomba y una frecuencia que experimentan el aumento de Raman.

 
Web www.patentalert.com

< Fiber optic cable having a low-shrink cable jacket and methods of manufacturing the same

< Freestanding athermal polymer optical waveguide

> Method for fabricating planar light waveguide circuits with vertical taper structure

> Optical fiber and method of making the same

~ 00102