Method and circuit configuration for establishing data signal connections

   
   

Optimum use is made of a currently available data connection capacity for data signal connections between data terminals, which are connected to a circuit-switched switching center, and/or between these data terminals and a data network, in particular the Internet data network, which is connected to the switching center. For the purpose of making optimum use of the currently available transmission capacity for traffic loads on the switching center, additional transmission capacity to that which is available for normal connections is provided below a first threshold V1. If the traffic load exceeds the first threshold V1, the provision of additional transmission capacity for new data signal connections stops. If the traffic load undershoots a second threshold V2, which may be the same as the first threshold V1, additional transmission capacity for new data signal connections is provided again. If the traffic load exceeds a third threshold V3, which is above, between or below the first and second thresholds V1, V2, then, in addition to the action when the first threshold V1 is exceeded, the additional transmission capacity is removed from at least some existing connections.

Het optimale gebruik wordt gemaakt van een nu verkrijgbare capaciteit van de gegevensverbinding voor de verbindingen van het gegevenssignaal tussen gegevensterminals, die aan een circuitgeschakeld omschakelingscentrum worden aangesloten, en/of tussen deze gegevensterminals en een gegevensnetwerk, in het bijzonder het de gegevensnetwerk van Internet, dat met het omschakelingscentrum wordt verbonden. Voor het maken van optimaal gebruik van de nu verkrijgbare transmissiecapaciteit voor verkeersladingen op het omschakelingscentrum, wordt de extra transmissiecapaciteit aan dat die voor normale verbindingen beschikbaar is verstrekt onder een eerste drempel V1. Als de verkeerslading de eerste drempel V1 overschrijdt, de voorziening van extra transmissiecapaciteit voor nieuwe de verbindingeneinden van het gegevenssignaal. Als de verkeerslading undershoots een tweede drempel V2, die het zelfde kan zijn als de eerste drempel V1, extra transmissiecapaciteit voor de nieuwe verbindingen van het gegevenssignaal opnieuw wordt verstrekt. Als de verkeerslading een derde drempel V3 overschrijdt, die hierboven is, tussen of onder de eerste en tweede drempels V1, V2, dan, naast de actie wanneer de eerste drempel V1 wordt overschreden, wordt de extra transmissiecapaciteit verwijderd uit minstens sommige bestaande verbindingen.

 
Web www.patentalert.com

< Method and system for form processing

< Telecommunication system for wireless telecommunication with a CDMA, FDMA, and TDMA multiple access component

> Method for ATM communication statistical multiplexing

> Electron beam apparatus

~ 00113