Cooling system for vehicle

   
   

To facilitate mounting of an oil cooler and a cooling fan. An oil cooler which is a cooler and a cooling fan are accommodated in the same case to form a cooling unit. This case is divided into a lid on the front half portion side and a fan cover on the rear half portion side, and the oil cooler is accommodated in the lid while the cooling fan is accommodated in the fan cover. The two members are put together from the front and the rear and are integrated with each other by means of fastening screws. Suspending projections project on the left and right of an upper face of the lid, and are attached to upper pipes, which are part of a vehicle body frame, through suspending brackets. Further, the oil cooler is accommodated in the lid in a state wherein damper rubber members are applied to four corners thereof. Consequently, the damper rubber members function as a rubber mounting structure in a non-coupled state wherein they are merely interposed between a joint recess and the oil cooler.

 
Web www.patentalert.com

< Method and system for controlling the performance of a motor vehicle

< Brake device for vehicle

> Power assisted wheeled carriage

> Vehicle with low ground clearance

~ 00124