Pump capable of releasing excessive air

   
   

A pump capable of releasing excessive air is shown to include a hollow base, a cylinder installed on and communicated with the hollow base, a piston movably received in the cylinder, a piston tube including a lower end connected with the piston and an upper end located beyond the cylinder, a tube including a lower end communicated with the hollow base and an upper end inserted into the piston tube through a channel defined in the piston, a release valve mounted on the upper end of the piston tube and a handle mounted on the upper end of the piston tube. The valve is installed on the handle so that it can be touched conveniently and operated easily by a user who is using the pump.

Показаны, что вклюает насос способный выпускать чрезмерно воздух полое основание, цилиндр установленный дальше и связанный с полым основанием, подвижно полученный поршень в цилиндре, пробку поршеня включая нижний конец соединенный с поршенем и верхний конец расположенный за цилиндром, пробку включая нижний конец связываемый с полым основанием и верхний конец введенный в пробку поршеня через канал определенный в поршене, клапан отпуска установленный на верхнем конце пробки поршеня и ручку установленную на верхнем конце пробки поршеня. Клапан установлен на ручку так, что ему можно коснуться удобно и эксплуатирова легко потребителем использует насос.

 
Web www.patentalert.com

< Piezoelectric rotary pump

< Float dependent wave energy device

> Multistage compression type rotary compressor and cooling device

> Fuel pump with automatic shutoff

~ 00143