Method of manufacturing electron-emitting device, electron source and image-forming apparatus

   
   

An electron-emitting device having an electroconductive film including an electron-emitting region arranged between a pair of device electrodes is manufactured. The electroconductive film is formed by applying a liquid containing the material of the film to a substrate by using an ink-jet method, then drying and heating the applied liquid. Defective conditions, if any, in the applied liquid or the precursor film formed by drying the liquid or the electroconductive film formed by heating the precursor film are detected and remedied by applying the same liquid again to the area detected for a defective condition. The detection and remedy of any defective condition may be conducted after the liquid-applying, drying or baking step.

Электрон-ispuska4 приспособление имея электрокондуктивную пленку включая электрон-ispuska4 зону аранжированную между парой электродов приспособления изготовлено. Электрокондуктивная пленка сформирована путем прикладывать жидкость содержа материал пленки к субстрату путем использование метода ink-jet, после этого сушащ и нагрюющ applied жидкость. Неполноценные условия, если любые, в applied жидкости или пленке прекурсора сформированных путем сушить жидкостную или электрокондуктивную пленку сформированную путем нагревать пленку прекурсора обнаружены и исправлены путем прикладывать такую же жидкость снова к области обнаруженной для неполноценного состояния. Обнаружение и выход любого неполноценного состояния могут быть дирижированы после шага жидкост-prikladyvat6, сушить или печь.

 
Web www.patentalert.com

< Superconducting microstrip filter having current density reduction parts

< Recording and reproducing apparatus

> Image forming method, image forming apparatus, process cartridge and photoconductor

> Method of manufacturing semiconductor device

~ 00145