A low-profile stepping motor comprises: an upper twin-stator yoke plate
composed of first and second upper stator yokes; a lower twin-stator yoke
plate composed of first and second lower stator yokes; first and second
coil units fixedly sandwiched between the upper and lower stator yoke
plates so as to be arranged horizontally flush with each other; and a
rotor assembly including a cylindrical magnet and disposed between the
first and second coil units. In the stepping motor, one of the upper and
lower twin-stator yoke plates is structured such that one half of its pole
teeth partitioned in half by a predetermined datum line and open spaces
each residing between two adjacent pole teeth of the other half are
positioned symmetrically about the predetermined datum line, whereby the
one twin-stator yoke plate can be used in common to the other twin-stator
yoke plate.
Ein flacher Schrittmotor enthält: eine obere Doppel-Stator Jochplatte bestanden aus zuerst und an zweiter Stelle obere Statorjoche; eine unterere Doppel-Stator Jochplatte bestanden aus zuerst und an zweiter Stelle unterere Statorjoche; zuerst und an zweiter Stelle Spule Maßeinheiten örtlich festgelegt sandwiched zwischen den oberen und untereren Statorjochplatten, damit horizontal geordnet zu werden mit einander bündig; und ein Rotor einschließlich einen zylinderförmigen Magneten und zwischen den ersten und zweiten Spule Maßeinheiten abgeschaffen worden. Im Schrittmotor wird einer der oberen und untereren Doppel-Stator Jochplatten so strukturiert, daß eine Hälfte seiner Pfostenzähne, die zur Hälfte durch eine vorbestimmte Bezugspunktlinie verteilt werden und geöffnete Räume jeder, der zwischen zwei angrenzenden Pfostenzähnen der anderen Hälfte liegt, symmetrisch über die vorbestimmte Bezugspunktlinie in Position gebracht werden, hingegen die eine Doppel-Stator Jochplatte im Common der anderen Doppel-Stator Jochplatte benutzt werden kann.