In a radio apparatus, the band of a loop filter of a synthesizer in a blank channel searching state is narrower than the band in a communicating state. In addition, a radio wave environment is measured. A characteristic necessary for the radio apparatus is determined corresponding to the measured-radio wave environment. The power is controlled corresponding to the performance of the radio apparatus. Thus, the power consumption is decreased. In addition, the efficiency of the output power is improved. In the radio apparatus, the current consumption of a power amplifier PA is measured. A matching circuit (LNA or MIX) of the antenna is adjusted with the measured result so as to decrease an antenna loss. In the radio apparatus, a DC offset is removed from the transmitted power and the reflected wave. When the DC offset is removed using an AC coupling capacitor, the deterioration of the frequency characteristic of the receiving portion is compensated with a capacitor in a digital signal process. In the radio apparatus, a transmission power detecting portion is structured as an IC chip. The transmission power detecting portion detects the transmission power corresponding to leakage currents in the power supply of the IC chip and the ground. Thus, when the power is detected, a power loss is suppressed. Consequently, the power consumption of the radio apparatus can be decreased.