A jobsite-renewable multilayer floor finish system has an undercoat employing a first hardening system, an autohardenable (e.g., two-part) topcoat employing a second hardening system, and at least one initiator for the topcoat hardening system in at least the undercoat. The initiator increases the topcoat hardening rate while reducing the topcoat pot life to a lesser extent than would be the case if the initiator were included only in the topcoat. The increased topcoat hardening rate facilitates earlier application of additional topcoat layers, or earlier return of the floor to service.

 
Web www.patentalert.com

< Conductive laminated film

> Non-planar surface structures and process for microelectromechanical systems

> Method of manufacturing MEMS devices providing air gap control

~ 00514