One leg of a connector connector is embedded inside a slot cut in a base panel structure. Adjacent laterally extensive legs overlap and are bonded to the face sheet of the base panel structure. Structural members can be attached to the remaining leg(s) of the connector. The legs bonded to the base panel structure enable loads to be transferred to or from the panel structure, and enable peel-off loads to be distributed through the base panel structure.

 
Web www.patentalert.com

< Aircraft wing, method for operating an aircraft wing, and use of a pivotable trailing edge on a main wing of an aircraft, for adjusting the shape and width of an air gap

> Spinning threat roll bearing estimator

> High-torque, low power reaction wheel array and method
~ 00514